craig-anatomy

[ Originally in the Proceedings of The Anniversary Conference,
Imperial College, London.  September 1992. ]

[ This version has been revised slightly to take into account some of
the changes in Version 2.0 of MemUtil. ]


		      Anatomy of an Application
			       -- or --
	       What HP Don't Tell You About Developing
	      System Manager Applications for the HP95LX

				  by
			   Craig A. Finseth
	       Imperial College, London, September 1992


This paper describes how an HP95LX system manager-compliant
application is put together.  It tries to cover the various things
that HP left out of their documentation.  It assumes that you:

- know what an HP95LX is,
- have used one enough to understand what the system manager is,
- are generally familiar with C and Intel assembly language programming,
- know the overall structure of the 8086-series CPU (registers,
segments, etc.),
- have a copy of the HP95 Internal Documentation supplied by HP to
their developers, and
- have a copy of the HP95 development tools supplied by HP (available
via anonymous FTP).

Essentially, this paper does not _replace_ HP's documentation, it
_supplements_ it.

Code examples are from the MemUtil and Freyja applications written by
the author.  These are both freely available (see the last section),
and the distributions include the full source code.

All of that said, let's dive in.


SEGMENT STRUCTURE

A system manager-compliant application (from now on, just called "an
application") starts life as an MS/DOS .EXE file.  Either the tiny
(code + data up to 64 KBytes) or small (both code and data can be up
to 64 KBytes each) model can be used.  Almost everyone except the
Forth people use the small model, as there is no advantage to using
the tiny model.

The program's code space must be "pure" (i.e., no data can be stored
there).  The system manager tracks which part of the application is
code and which part is data.  Only one code area is allocated in the
95, and that area is shared among all applications.  When a non-ROM
application is activated, its code is swapped into that area.  The old
code is simply discarded; it is not saved back to disk (memory).
Hence, if an application were to modify its code segment, that
modification can be discarded at any time. Each application has a
separate data area, and that area is never swapped out (it may be
moved, though, anytime the system manager is invoked).

Other general notes:

- Only system manager (preferred) and documented MS/DOS calls should
be used.  Going directly to the hardware is _not_ advised.

- They really mean that for the serial port: there are a number of
bugs / oddities about the serial port hardware.

- They mean that a little less about the video hardware.  However,
unlike the ROM BIOS routines, the system manage display routines are
fairly fast so you have much less incentive to go around them than
when writing traditional MS/DOS programs.

- Everyone will ignore this recommendation about the keyboard, in
particular for various TSRs.  However, a real system-manager compliant
application _must_ only obtain keyboard input by means of the
m_event-related calls.

- Applications _must_ do their own memory management using system
manager or MS/DOS calls.  Do not use language-supplied primitives, as
they assume a pure MS/DOS environment and are apt to get confused by,
for example, having the data segment move around beind their backs.

- FAR calls and data references must be calculated at run time.  (See
the full description of the fixup bug presented in a later section.)

All of that stuff sounds good, but where's some code?  Here is the
first code snippet.  This code sets up the segment structure for the
application.  It _replaces_ the c0s.obj module ordinarily linked in.
This -- like all examples -- is for Borland C, but will work with
Microsoft C with a few minor changes:

	DOSSEG			; macro that defines segment structure
	.model	small		; specifies model
	.stack	10240		; this defines your stack size
	.data?			; start data segment
segpad	db	15 dup (?)	; this is unused, but ensures that
				; the code ends in a different
				; paragraph from where the usable data
				; starts
	.code			; switch to code
	org	10H		; skip 16 bytes
	end			; that's it, the program counter will
				; drop through to whatever is next

Aside from this different object header (and a host of special calls
and assumptions within the program!), there are only two differences
between .EXE files and their corresponding .EXM application files.

First, the first two bytes of the .EXE file are set to a different
"magic number" than that used for .EXE files.  In this case, the bytes
are set to 0x44 and 0x4c.  This changed number tells the system
manager that the file is a system manager-compliant application.

Second, the (unused) overlay count field (bytes 26 and 27 from the
start) are patched to the location of the divider between the code
segment and the data segment.  This value is used by the system
manager to figure out how much of your application can be shared. (The
overlay count field must be unused, as the total code space can be at
most 64 KBytes.)

For precise details of the changes, see the "makeexm.c" file included
with the MemUtil and Freyja distributions.


MAIN LOOP

Up above, the comment said that the program counter will drop through
to whatever is next.  So, what's next?  This:

static FLAG isterm = FALSE;	/* are we quitting the program? */

void
main(void)
	{
	EVENT e;

	m_init();

	e.kind = E_KEY;
	do	{
		if (e.kind == E_KEY) Display();

		m_event(&e);
		switch (e.kind) {

		case E_NONE:
			m_telltime(2, -3, 23);
			break;

		case E_KEY:
			/* lots more code */
			break;

		case E_ACTIV:
			Refresh();
			Display();
			break;
			}
		} while (!isterm && e.kind != E_TERM);
	m_fini();
	}

The main() routine has a declaration that conforms to the ANSI-C
standard, but is somewhat unusual.  It accepts no parameters as the
system manager has no concept of a command line, and returns no value.

The central local variable is an event.

The program starts by calling m_init(), which sets things up for the
system manager.  This, like all system manger calls, is actually a
macro.  It looks like this:

#define SC_PM		6

#define F_M_INIT	(SC_PM * 256) + 0
#define m_init()	c_service(F_M_INIT)

(This code Copyright by Lotus Development Corp.) This call passes one
parameter to the c_service() routine.  This parameter tells, using a
tedious but simple coding scheme, which call to invoke.  A call that
takes parameters uses a function prototype to cast the parameter to
the proper type.  For example, the m_event() call looks like:

#define SC_EVENT	1

#define F_M_EVENT	(SC_EVENT * 256) + 0
#define m_event(a)	\
	c_service(F_M_EVENT,(void far *)(a) )

(This code Copyright by Lotus Development Corp.) Values are returned
using call-by-reference (you pass a pointer to a buffer) or, if the
value fits into a single, 16-bit value, as a normal return in the AX
register.  The carry flag and other such holdovers from assembly
language are not used.  (This is the last function calls whose
definition we will expand.)

What is this c_service() routine?  It is an assembly language stub
that links between the C code and the system manager call.  It looks
like this:

_c_service proc near
	push	BP		; save old base pointer
	mov	BP,SP		; set up for base-relative addressing
	xchg	DI,[BP+4]	; put operation code in DI, and old
				; contents of DI where the operation
				; code was (this is presumably
				; restored by the system manager code)
	pop	BP		; clean up the stack a little
	int	60H		; invoke the system manager
	ret			; all done
_c_service endp

The version of this routine supplied by HP has hooks for patching the
int instruction's 60H to 61H.  These are probably left over from
internal development as there is no way to make use of that hook since
you are not allowed to alter your code image.

Returning to our top-level loop, we have:

	e.kind = E_KEY;
	do	{
		if (e.kind == E_KEY) Display();

The initialization of e.kind provides for a clean loop structure. The
first time -- and each time through the loop after a key press -- the
Display() routine is called.  This routine constructs (almost all) of
the display and will be discussed later.

The program then calls the m_event() routine to obtain the next event.
MemUtil only handles three types of events.

		m_event(&e);
		switch (e.kind) {

		case E_NONE:
			m_posttime();
			break;

		case E_KEY:
			/* lots more code */
			break;

		case E_ACTIV:
			Refresh();
			Display();
			break;
			}

The E_NONE event is returned whenever the event manager hasn't got
anything else to return.  In an idle, running system, this event will
be returned to the active application about every half-second.  It is
used for updating displays, in this case, the time of day clock update
handled with m_posttime().

The E_KEY event is returned when a keystroke is available.  We will go
into this process in more depth later.

The E_ACTIV event is returned when your application is being "woken
up."  From your application's point of view, the following steps
happen during the deactivate / activate cyle started when the user
selects another application:

- You are running fine, and have called m_event(), so your application
is blocked waiting on input.

- The user presses the "hot key" for another application.

- The m_event() call returns with a E_DEACT event.

- You do whatever cleanup is required (for example, updating the
clipboard), then call m_event() again.  At this point, you have been
deactivated.

- Your application hangs for a long time.

- Eventually, the user presses the "hot key" for your application.

- The m_event() call returns with a E_ACTIV event.

- Your application gets itself started again.

In MemUtil's case, getting started involves calling the Refresh()
routine to update any changed data (this application's purpose is to
read and display system data, so it has to fetch any changed data),
then calling Display() to reconstruct the display.

Other events that can be returned are:

- E_BREAK: a Control-Break has been encountered.

- E_TERM: your application is being shut down (for example, the user
has requested closure from the low memory screen).  The next call to
m_event() won't return but it is nicer if you close down and clean up
by calling m_fini().

- E_ALARM_EXP: your application's alarm has expired.

- E_ALARM_DAY: daily chance to set an alarm.

- E_TIMECHANGE: the system date or time has been changed.

Finally, the main loop is closed with this code:

		} while (!isterm && e.kind != E_TERM);
	m_fini();
	}

The isterm flag is a global.  When the loop exits, the program calls
m_fini(), which never returns.


HANDLING KEYBOARD INPUT

The main loop handles all events.  Most events are of a "housekeeping"
nature and your program must handle them properly or it won't work.
Keyboard events, on the other hand, are what gives your application
its "feel."  Before we look at too many details, let's review the
overall structure of MemUtil and see what we want to implement.

MemUtil is organized around "tasks" or "views" of six types of data.
The tasks are help, short applications, long applications, memory
chains, memory, and characters.  All six are presented to the user in
the same way: the task appears as a one-dimensional array of something
and the user is "at" a current selection.  The details vary among the
tasks:

			array of...	can see...at a time

help			lines			12
short applications	applications		12
long applications	applications		1
chains			chain links		12
memory			paragraphs		6
characters		character set entries	12

(From now on, I'll use the term "object" to refer to the "something"
for the current task.) I use the following enum to list the task
types:

	/* display status */
enum dstate { DHELP, DAPPS, DAPLONG, DCHAINS, DMEM, DCHARS };

and have an array of structures that holds the current status of each
task:

	/* task control structures */
struct task {
	enum dstate disp;	/* which type of display to use */
	unsigned height;	/* height of screen in objects */
	unsigned start;		/* first object */
	unsigned num;		/* number of objects */
	unsigned cur;		/* current object, >= 0 and < num */
	};
static struct task t[] = {
	{ DHELP, HEIGHT, 0, 0, 0 },
	{ DAPPS, HEIGHT, 0, NUMAPPS, DEFAULTAPP },
	{ DAPLONG, 1, 0, NUMAPPS, DEFAULTAPP },
	{ DCHAINS, HEIGHT, 0, 1, 0 },
	{ DMEM, HEIGHT / 2, 0, 64, 0 },
	{ DCHARS, HEIGHT, 0, 512, 0 } };

For the short applications, long applications, and characters tasks,
the only structure entry that changes is the current object.  For the
help and chains tasks, the number of items is set up when the program
starts and remains essentially unchanged.  The memory task is the only
one that regularly varies the start and number of items entries.  The
current task is tracked with a pointer variable:

static struct task *curt = &t[DAPPS];		/* current task */

The program does two forms of sanity checking at the top of the main
loop.  While this code could be placed somewhere else, putting the
check here means that it need not be duplicated.

First, the program checks to ensure that the current object is within
the array bounds:

		if (curt->cur > curt->num - 1) curt->cur = curt->num - 1;
		if (curt->num == 0) curt->cur = 0;

Since the values are all unsigned, it is meaningless to check for
negative values.

Second, the short application and long application tasks always have
the same current object.  We slave them together with this code:

		/* ensure that the APPS and APLONG selections stay in sync
*/
		if (curt == &t[DAPPS]) t[DAPLONG].cur = curt->cur;
		if (curt == &t[DAPLONG]) t[DAPPS].cur = curt->cur;

MemUtil's main display is modeless: pressing a key always has the same
effect, regardless of the current task.  (Of course, the menu, file
getter, and dialog boxes are modes, but they are not part of the main
screen.)  The program implements this "modelessness" by having most
functions simply ignore the current state.  For example, this code
implements the F1 key, which selects the help task:

			case 0x3b00:		/* F1 */
				Push_Task();
				curt = &t[DHELP];
				break;

The Push_Task routine saves the current task for use with the Esc key.

This "modelessness" is not quite perfect: the program implements two
useful "warts."  The first of these is the Enter key:

			case CR:
				if (curt == &t[DAPPS] || curt ==
&t[DAPLONG]) {
					Push_Task();
					curt = &t[DMEM];
					curt->start = acbs[t[DAPPS].cur].ds;
					curt->num = APPSEGSIZE;
					curt->cur = 0;
					}
				else if (curt == &t[DCHAINS]) {
					Push_Task();
					curt = &t[DMEM];
					curt->start =
links[t[DCHAINS].cur].seg;
					curt->num =
links[t[DCHAINS].cur].size;
					curt->cur = 0;
					}
				break;

This code simply "redirects" the function in this manner:

	in			makes it appear as if this key was typed:

	short application	F5 (long application)
	long application	F4 (memory)
	chains			F4 (memory)

But, there's more.  If you switch _from_ the long application task, it
automatically initializes the memory task to point to the current
application's data space.  If you switch from the chains task, it
automatically initializes the memory task to point to the current
chain area.

The fact that all tasks use the same model makes it very easy to
implement the arrow keys.  The Home key moves you to the first object
and the End key moves you to the last:

			case 0x4700:		/* Home */
				curt->cur = 0;
				break;

			case 0x4f00:		/* End */
				curt->cur = curt->num - 1;
				break;

The Up and Down Arrow keys move you by one object.  Note the special
checking required due to the use of unsigned values:

			case 0x4800:		/* Up */
				if (curt->cur >= 1) curt->cur--;
				break;

			case 0x5000:		/* Down */
				curt->cur++;
				break;

The PgUp and PgDn keys move you up one screen's worth of objects:

			case 0x4900:		/* PgUp */
				if (curt->cur >= curt->height)
					curt->cur -= curt->height;
				else	curt->cur = 0;
				break;

			case 0x5100:		/* PgDn */
				curt->cur += curt->height;
				break;

The Left and Right Arrow keys have no meaning in a one-dimensional
array model, and I wanted to be able to move by larger steps than one
screen.  Hence, I have these keys move by 10% of the objects:

			case 0x4b00:		/* Left */
				amt = curt->num / 10;
				if (amt < 1) amt = 1;
				if (curt->cur >= amt)
					curt->cur -= amt;
				else	curt->cur = 0;
				break;

			case 0x4d00:		/* Right */
				amt = curt->num / 10;
				if (amt < 1) amt = 1;
				curt->cur += amt;
				break;

The handling of the rest of the keystrokes will be discussed in later
sections.


DISPLAYING THE SCREEN

The keyboard input handling defines part of your application's
personality: the display establishes the rest.  The HP Internal
Documentation suggests (when handling E_ACTIV events) that you
regenerate the display from first data instead of storing a copy of
the screen.  I chose to follow the suggested philosophy throughout
MemUtil (Freyja does this regeneration too, but its redisplay was
devised long before the 95 and this method was selected for different
reasons).

The display code is divided into two parts: the generic "framing" code
and the task-specific code.

I added a new (to the HP95) display feature: a slider bar that shows
the approximate size and location of the current screen in relation to
the entire array of objects.  Much of the apparent complexity of the
framing code is to implement this feature.  This feature entailed two
major design choices.

First, a slider bar would in general be more familiar if it ran along
the left or right side of the display than along the top.  However,
screen space is at a premium in the HP95, and the existing application
standards had already defined a standard display structure: the double
bar in the second display line.  I chose to elaborate on that
structure by making use of that bar instead of inventing something
incompatible.  As a side effect of this decision, the separation of
framing code and per-task code was kept clean as the per-task code
could display complete lines.

Second, I chose to implement the slider as a single "pinched" line.
There are a number of other characters that I could have selected.
However, Edward Tufte in his "The Visual Display of Quantitative
Information" (1983, Graphics Press, Cheshire, Connecticut) recommends
minimizing the amount of "ink" used, and I felt that the minimal
approach improved the quality of the display.

The framing code looks like this:

void
Display(void)
	{
	char buf[41];	/* we know how big the screen is */
	int start;	/* this stuff is for calculating the slider bar */
	int stop;
	unsigned ustart;
	unsigned ustop;
	unsigned tmp;

	VidCurOff();	/* force the cursor off */

			/* display the top line */
	m_disp(-3, 0, "MemUtil V2.0                            ", 40, 0, 0);

			/* build the slider bar, using 16-bit
			arithmetic */
	memset(buf, '\xCD', 40);

	if (curt->num > 0) {
		if (curt->num > 512) {	/* losing precision isn't so bad...
*/
			tmp = curt->num / 40;
			ustart = curt->cur / tmp;
			if (ustart > 39) ustart = 39;
			ustop = (curt->cur + curt->height) / tmp;
			if (ustop <= ustart) ustop = ustart + 1;
			if (ustop > 40) ustop = 40;
			memset(&buf[ustart], '\xC4', ustop - ustart);
			}
		else	{	/* don't worry about overflow */
			start = (curt->cur * 40) / curt->num;
			if (start < 0) start = 0;
			if (start > 39) start = 39;
			stop = ((curt->cur + curt->height) * 40 ) /
curt->num;
			if (stop <= start) stop = start + 1;
			if (stop > 40) stop = 40;
			memset(&buf[start], '\xC4', stop - start);
			}
		}
	m_disp(-2, 0, buf, 40, 0, 0);

			/* select the per-task display */
	switch (curt->disp) {

	case DHELP:	Disp_Help();	break;
	case DAPPS:	Disp_Apps();	break;
	case DAPLONG:	Disp_ApLong();	break;
	case DCHAINS:	Disp_Chains();	break;
	case DMEM:	Disp_Mem();	break;
	case DCHARS:	Disp_Chars();	break;
		}

			/* put up the function key labels; note the
			"1" in the second-to-last position that
			specifies inverse video */
	m_disp(11, 0, "Help    Apps    ApLong  Para    Length  ", 40, 1, 0);
	m_disp(12, 0, "    Chains  Mem     Chars   Key   Offset", 40, 1, 0);
	}

In general, I have found the system manager display routines to be
fast and well-matched to the required functionality.  However, their
screen model has line -3 at the top and line 12 at the bottom.  I have
found no good reason for this (other than historical), and it has
caused me numerous bugs during development.

[ The historical reason for this choice stems from the evolution of
the system manager.  Most system manager interface functions are taken
from the Lotus internal development environment.  This explains both
why they are so well-suited to an application's needs and also why
they are so idiosyncratic.  Anyway, a standard Lotus screen has three
lines of heading before you get to the spreadsheet, which then starts
at line zero.  That explains the -3.  However, an HP95 application
will in general have only two lines of header (title and double bar)
before you get to the screen, which therefore starts at line -1.
That's life. ]

The per-task display routines all do essentially the same job, but
they vary in how complicated it is to build the display.  The help
task's routine is simple and will be used to illustrate the basic
structure:

void
Disp_Help(void)
	{
	char buf[BUFFSIZE];
	int cnt;

			/* Loop until you get to the end of the screen or
			run out of objects. */
	for (cnt = 0; cnt < HEIGHT && cnt + curt->cur < curt->num; cnt++) {

			/* Put into a buffer, with 40 trailing spaces
			xsprintf is a private version of sprintf that
			has somewhat different performance tradeoffs. */
		xsprintf(buf, "%s                                        ",
			Help_Line(curt->cur + cnt));

			/* Display the first 40 characters of the
			buffer. */
		m_disp(-1 + cnt, 0, buf, 40, 0, 0);
		}

			/* If you ran out of lines and have not run
			out of screen, blank the rest of the screen. */
	if (cnt < HEIGHT) {
		m_clear(-1 + cnt, 0, HEIGHT - (-1 + cnt), 40); 
		}
	}

and that's it.


MENUS

It is important that applications handle the menu bar properly.  The
most important place is in the main event loop, and my menu key code
is this simple:

			case 0xc800:		/* MENU */
				GetMenu();
				break;

Of course, implementing that call is a little less simple. The routine
that does this operates in three phases.

The first phase handles the declarations and menu setup.  You have to
declare a MENUDATA structure and an EVENT structure, along with a
couple of housekeeping variables.  (Note: this program does not make
use of the GetMenu routine's return value.  However, Freyja does and I
like to keep the structure of and interfaces to the routines the same
among my programs.)

FLAG
GetMenu(void)
	{
	MENUDATA u;
	EVENT e;
	int which = 0;
	FLAG isdone = FALSE;

			/* This routine initializes the menu
			structure.  Note the use of embedded \0
			characters to delimit the menu entries
			and ANSI concatenated strings to handle
			the hex constants.  \x1a is a right
			arrow character. */
	menu_setup(&u, "A)\x1a" "Clip\0B)\x1a" "File\0C)\x1a"
		"Clip(bin)\0D)\x1a" "File(bin)\0Quit\0", 5, 1, NULL, 0,
NULL);

	VidCurOff();	/* turn the cursor off */

	menu_on(&u);	/* turn on the menus */

The second phase handles the menu entry proper.  It has the same
overall structure as the main loop.  Instead of calling the
application's display routine, it calls menu_dis() to display the
current menu (remember that the selected entry is highlit, so the
"current" menu _does_ change) and the menu bar.  (The double bar
display wasn't built into the menu routine because Lotus 1-2-3 doesn't
use the double bar.)

	e.kind = E_KEY;
	while (!isdone) {
		if (e.kind == E_KEY || e.kind == E_ACTIV) {
			menu_dis(&u);
			m_disp(-1, 0,
"\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xC
D\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xC
D\xCD\xCD", 40, 0, 0);
			}
		m_event(&e);		/* get the next event */
		switch (e.kind) {

			/* You've been suspended and are back.  Do a
			full refresh/display build.  When you come
			around again, the menu will be redisplayed by
			means of the above code. */
		case E_ACTIV:
			Refresh();
			Display();
			break;

			/* Got a terminate, so clean up and exit. */
		case E_TERM:
			isterm = TRUE;
			isdone = TRUE;
			break;

			/* Got a key. */
		case E_KEY:
			if (e.data == ESC) {	/* you have to handle */
				which = -1;	/* ESC yourself */
				isdone = TRUE;
				}
			else	{	/* handle all other key
					presses; which is set to
					0..#entries1 when an item is
					selected */
				menu_key(&u, e.data, &which);
				if (which != -1) isdone = TRUE;
				}
			break;
			}
		}

In the third phase, the menu interaction is over and it is time to
actually do something.

	menu_off(&u);		/* Turn off the menu display; this
				also restores what's underneath, but
				you're going to regenerate it
				anyway. */
	if (isterm) return(TRUE);	/* ESC pressed, so don't do
					anything. */

	switch (which) {

	case 0:
		/* do the first selection... */
		break;

	case 1:
		/* do the second */
		break;

		...
	case 4:
		isterm = TRUE;	/* Quit selected. */
		break;
		}
	return(TRUE);
	}

And that's about it.  Menus aren't all that difficult, are they?


DISPLAYING A MESSAGE / ACCEPTING ONE KEY

These are two separate, but related functions.  The first function is
to display a one-line message and wait for the user to acknowledge it
by pressing a key.  The second function is to display a prompt,
accept a key of input, and return the entered key.

A typical call might look lie this:

	key = GetKey("Press key to view");

(This example is part of the code that handles the F8 key.  The
function on this key asks the user to press any key, then brings up
the Characters task with that key selected.)

The GetKey routine looks like this:

int
GetKey(char *str)
	{
	EVENT e;

	m_lock();	/* Lock out application switching.  If the
			user presses a "hot key," it won't do anything. */

			/* Display the message.  The call actually
			displays two lines, although we never use the
			second.  Note that the system manager calls
			tend to take (pointer to string, length of
			string) pairs and not use NUL-terminated
			strings. */
	message(str, strlen(str), "", 0);

	do	{	/* Until you get a key press... */
		m_event(&e);
		} while (e.kind != E_KEY);

	msg_off();	/* Turn off the message, which restores what
			was underneath. */

	m_unlock();	/* Turn application switching back on. */
	return(e.data);	/* Return the keystroke. */
	}


ACCEPTING A STRING

String entry involves another event loop.  As with menus, you must
fully support activation, deactivation, etc.  The GetStr routine has
this interface:

	FLAG GetStr(char *prompt, char *buf, char *deflt)

The first parameter is a NUL-terminated prompt string.  The second
parameter is a pointer to an 80-character long buffer to hold the
response.  The third parameter is a pointer to a default value, which
must be less than 80 characters long.  The routine returns True on
successful string entry or False if there was a problem.  As with the
GetMenu routine, it also sets isterm if the application should exit.

MemUtil uses the GetStr routine in only one place: when accepting a
hexadecimal value.  Thus, the call looks like this:

	char buf[80];	/* response buffer */
	char buf2[80];	/* default buffer */

		/* construct the default value from the passed-in
		(numeric) default value */
	xsprintf(buf2, "%x", *val);
		/* call the routine, using the passed-in prompt */
	if (!GetStr(prompt, buf, buf2)) return(FALSE);

Here's the routine itself:

FLAG
GetStr(char *prompt, char *buf, char *deflt)
	{
	EDITDATA ed;		/* our first exposure to this */
	EVENT e;		/* you've seen this one before */
	FLAG isdone = FALSE;
	FLAG ok = TRUE;
	int result;

		/* Set up the edit data structure. It gets loaded
		with the default value, the maximum input length (16),
		the prompt, and the (unused) second prompt line. */
	edit_top(&ed, deflt, strlen(deflt), 16, prompt, strlen(prompt), "",
0);

		/* You've seen this before.  We use edit_dis to
		update the display. */
	e.kind = E_KEY;
	while (!isdone) {
		if (e.kind == E_KEY || e.kind == E_ACTIV) edit_dis(&ed);
		m_event(&e);
		switch (e.kind) {

		case E_ACTIV:
			Refresh();
			break;

		case E_TERM:		/* handle termination */
			isterm = TRUE;
			ok = FALSE;
			isdone = TRUE;
			break;
		
		case E_BREAK:		/* handle break key */
			ok = FALSE;
			isdone = TRUE;
			break;

		case E_KEY:
			if (e.data == ESC) {	/* handle Esc key */
				ok = FALSE;
				isdone = TRUE;
				}
			else	{	/* handle each keystroke */
				edit_key(&ed, e.data, &result);
				if (result == 1) isdone = TRUE;
				}
			break;
			}
		}

	Display();	/* Put the display back: no routine to do
			this for you. */
	if (!ok) return(FALSE);		/* cancel */
	xstrcpy(buf, ed.edit_buffer);	/* have a valid string, so
					copy it to the return
					buffer */
	return(TRUE);
	}


USING THE FILE GETTER

Now we come to the file getter.  This is the last -- and messiest --
of the event loops.  Much of it will be familiar, yet it has its own
twists.

The interface is:

	FLAG GetFile(char *prompt, char *fname, FLAG usestar)

As before, you pass it a prompt string and a pointer to a filename.
The area pointed to by this filename must be at least 79 character
long (the maximum legal length of an MS/DOS file name.)  It serves
_both_ as the place to return the new name and as the source for the
default value, so be sure to initialize it before calling this
routine.  If usestar is True, force the file name part to "*.*", thus
bringing up a display of all files in the directory.  The routine
returns True on successful file name entry or False if there was a
problem.  As with the GetMenu routine, it also sets isterm if the
application should exit.

The routine uses these local variables:

	FILEINFO fi[100];	/* Can display up to 100 files at
				once.  Change this constant to change 
				the maximum number of files that can
				be displayed at once.*/
	FMENU f;		/* file menu extra data structure */
	EDITDATA ed;		/* you've seen these */
	EVENT e;
	FLAG isdone = FALSE;
	FLAG ok = TRUE;
	char dn[FNAMEMAX];	/* working copy of the directory part */
	char fn[FNAMEMAX];	/* working copy of the file part */
	char *cptr;		/* scratch variable */

	xstrcpy(dn, fname);	/* make a copy of the name */

		/* This code splits the full name into the directory
		and file parts.  It starts at the end and searches
		backwards until it finds a /, \, or :.  If there isn't
		one, it sets the directory part to "". If there isn't
		a file part, that is set to "". */
	for (cptr = dn + strlen(dn); cptr > dn; --cptr) {
		if (*cptr == ':' || *cptr == '/' || *cptr == '\\') break;
		}
	if (*cptr == ':' || *cptr == '/' || *cptr == '\\') {
		xstrcpy(fn, cptr + 1);
		*(cptr + 1) = NUL;
		}
	else	{
		xstrcpy(fn, cptr);
		*cptr = NUL;
		}
		/* If there is no file part or usestar is True, force
		the file name to "*.*". */
	if (*fn == NUL || usestar) {
		xstrcpy(fn, "*.*");
		}

		/* Initialize the required parts of the file menu
		structure. */
	f.fm_path = dn;		/* directory name part */
	f.fm_pattern = fn;	/* file name part */
	f.fm_buffer = fi;	/* place to put the working names */
	f.fm_buf_size = sizeof(fi);	/* how big (many) */
	f.fm_startline = -2;	/* top line... *sigh* */
	f.fm_startcol = 0;	/* left edge */
	f.fm_numlines = 16;	/* use all lines */
	f.fm_numcols = 40;	/* and all columns */
	f.fm_filesperline = 3;	/* can fit this many across */

		/* Now, set up the edit buffer part. Just copy these
		values... */
	ed.prompt_window = 1;
	ed.prompt_line_length = 0;
	ed.message_line = prompt;
	ed.message_line_length = strlen(prompt);

		/* clear the screen */
	m_clear(-3, 0, 16, 40);

		/* start things up */
	if (fmenu_init(&f, &ed, "", 0, 0) != RET_OK) {
		GetKey("can't init file getter");
		return(TRUE);
		}

		/* the usual, you've seen all this */
	VidCurOff();
	e.kind = E_KEY;
	while (!isdone) {
		if (e.kind == E_KEY || e.kind == E_ACTIV) fmenu_dis(&f,
&ed);
		m_event(&e);
		switch (e.kind) {

		case E_ACTIV:
			Refresh();
			break;

		case E_TERM:
			isterm = TRUE;
			isdone = TRUE;
			break;
		
		case E_BREAK:
			ok = FALSE;
			isdone = TRUE;
			break;

		case E_KEY:
			if (e.data == ESC) {	/* handle Esc */
				ok = FALSE;
				isdone = TRUE;
				}
			else	{	/* this routine has multiple
					return values, which tell you
					what to do */
				switch (fmenu_key(&f, &ed, e.data)) {

				case RET_UNKNOWN:	/* bad key */
				case RET_BAD:
					m_thud();
					break;

				case RET_OK:		/* keep goin' */
					break;

				case RET_REDISPLAY:	/* reshow the
							screen */
					break;

				case RET_ACCEPT:	/* done, ok */
					isdone = TRUE;
					break;

				case RET_ABORT:		/* done, cancel */
					ok = FALSE;
					isdone = TRUE;
					break;
					}
				}
			break;
			}
		}

		/* turn off the display, then put ours back */
	fmenu_off(&f, &ed);
	Display();
		/* copy the file name to the return buffer */
	xstrcpy(fname, ed.edit_buffer);
	return(ok);
	}


USING THE CLIPBOARD

The clipboard is used for transferring data between applications
(without retyping it, that is!).  It is a variable-sized part of
system RAM, stored in the system manager's data space.  One object at
a time is placed in the clipboard, although it can have as many
representations as your application cares to create.  Given that the
object can be composite (e.g., a column from a spreadsheet) and that
the interpretation of the different representations is assigned by
each application, the "one object" limit is not much of a limitation.

Representations are identified by four-character tags. By convention
every object should have a representation named "TEXT", and this
representation should contain a pure text version of the object.  In
this representation, newlines are stored as a bare Carriage Return
(^M, 13 decimal) characters, unlike everywhere else in MS/DOS.

MemUtil has no need to accept data from the clipboard, although Freyja
does and so we'll see an example from Freyja for that operation.
MemUtil does copy data into the clipboard.  The type of copying is
specified using a menu selection. Forms are:

- copy ASCII-text representation to the clipboard
- copy binary representation to the clipboard
- copy ASCII-text representation to a file
- copy binary representation to a file

When you make a selection, MemUtil copies the entirety of the data in
the current task to the specified place.  For example, you might be in
the memory task with the current view starting at paragraph 5 and
extending for 10 paragraphs. In this case, the copy ASCII-text
representation command would copy about 800 bytes into the clipboard
in an 80-column version of the memory display.  The copy binary
representation command would copy exactly 160 bytes into the clipboard
as "raw" data.  No newline translations would be made in this case.
In a similar fashion, if you want to save a copy of the help text,
just select the help task and then copy to the clipboard.

MemUtil's clipboard (and file copying) routines are structured in a
way similar to the display-generating routines.  There is one
"generic" call that opens the clipboard, dispatches to the correct
routine, then closes the clipboard (we're ignoring the file stuff in
this discussion) .  This routine looks like this:

void
ToClip(void)
	{
		/* Start talking to the clipboard. */
	if (m_open_cb() != 0) {
		GetKey("Can't open clipboard");
		return;
		}

		/* Clear the current data, and sign the data that
		we are about to write. */
	if (m_reset_cb("MemUtil") != 0) {
		GetKey("Can't init clipboard");
		m_close_cb();
		return;
		}

		/* Start a text representation (we'll only generate
		the one). */
	m_new_rep("TEXT");

		/* Put up a message as this may take a while. */
	message("copying to clipboard...", 23, "", 0);

		/* This next call tells the display routines to
		actually display the message.  Ordinarily, this detail
		is handled when you ask for input.  You only need to
		make this call if you want the display actually
		updated, but aren't going to ask for input right
		away. */
	m_dirty_sync();

		/* Dispatch.  The arguments are simply passed through
		to To_Write(). */
	switch(curt->disp) {

	case DHELP:	To_Help(-1, 0);		break;
		...
		}

		/* Close this representation. */
	m_fini_rep();

		/* If you wanted to write another representation,
		start with another m_new_rep() call. */

		/* All done writing the clipboard. */
	m_close_cb();
	}

The following routine writes out the help text.  There is no
difference between the ASCII and binary representations.

void
To_Help(int fd, int clip)
	{
	int cnt;
	char *cptr;

	isbin = FALSE;

		/* For each line... */
	for (cnt = 0; cnt < Help_Num(); cnt++) {

			/* ...point to the start...  */
		cptr = Help_Line(cnt);

			/* ...call the generic write routine */
		if (!To_Write(fd, clip, (char *)cptr, strlen(cptr))) return;
		}
	}

This is a generic write routine.  If the global isbin is False, we
assume that we are writing a complete line and append a newline.
Otherwise, we just write the data.

The fd and clip parameters are simply passed through the task-specific
routines.  If fd is non-negative, it contains the file descriptor to
write.  Otherwise, if clip is non-negative, it indicates that you
should write to the clipboard.  The current representation is the only
one that you can write to, so you need not specify a descriptor. (If
neither is non-negative, you've got problems.)

FLAG
To_Write(int fd, int clip, char *buf, int len)
	{
		/* Handle file writes. */
	if (fd >= 0) {

			/* Write the data. */
		if (len > 0 && write(fd, buf, len) != len) {
			GetKey("Write Error");
			return(FALSE);
			}

			/* If not binary, write a newline */
		if (!isbin) {
			if (write(fd, "\r\n", 2) != 2) {
				GetKey("Write Error");
				return(FALSE);
				}
			}

			/* Done. */
		return(TRUE);
		}

		/* Write to the clipboard. */
	if (clip >= 0) {

			/* Write the data. */
		if (len > 0 && m_cb_write(buf, len) != 0) {
			GetKey("Write Error");
			return(FALSE);
			}

			/* If not binary, write a newline */
		if (!isbin) {
			if (m_cb_write("\r", 1) != 0) {
				GetKey("Write Error");
				return(FALSE);
				}
			}

			/* Done. */
		return(TRUE);
		}
	GetKey("Broken Writing...");
	return(FALSE);
	}

As MemUtil does no pasting from the clipboard, the example routine is
from Freyja.  Many of the application support routines differ from
those in MemUtil, but those differences shouldn't interfere with your
understanding of the clipboard functions.

FLAG
J_Paste(void)
	{
	int index;
	int len;
	char chr;
	int cnt;

		/* Start dealing with the clipboard. */
	if (m_open_cb() != 0) {
		DEchoNM("can't open clipboard");
		return(FALSE);
		}

		/* Look up the TEXT representation (which should
		always exist).  The index variable will contain a
		"file descriptor" and the len variable will contain
		the representation's length. */
	if (m_rep_index("TEXT", &index, &len) != 0) {

			/* No TEXT representation, so tell the user
			that it is empty.  We don't know how to deal
			with any other representations. */
		DEchoNM("nothing to paste");
		m_close_cb();
		return(FALSE);
		}

		/* Remember where we started in the buffer. After the
		paste is complete, the pasted text will be selected
		and can be manipulated right away. */
	BMarkToPoint(mark);
	for (cnt = 0; cnt < len; cnt++) {

			/* Read one character at a time. */
		m_cb_read(index, cnt, &chr, 1);

			/* Map Carriage Return to Newline */
		if (chr == '\xd') chr = NL;

			/* Insert it into the buffer. */
		if (!BInsChar(chr)) break;
		}

		/* All done. */
	m_close_cb();
	return(TRUE);
	}


MORE ON FIXUPS AND A MAJOR BUG IN THE 95

A .EXE file begins with a header that describes many things about the
program.  In addition to the two fields mentioned early in this paper
(the "magic number" and the overlay number), the header contains
information on the initial value of the program counter, the initial
value of the stack pointer, and so on.

One field in the header is very significant to the system manager: the
count of relocation offset entries.  This count is the length of a
table.  Each entry in this table is four bytes long, and specifies an
offset within the file of a place that must be updated by the loader
as the program is being loaded.  These entries are called relocation
offsets or, more colloquially, "fixups."

(If you want to learn all about .EXE file headers, I recommend "The
Wait Group's MS-DOS Developer's Guide, Second Edition" (1989, Howard
W. Sams, ISBN 0-672-22630-8).  This book tells you more than you want
to know about MS/DOS, including how fixups and memory block chains
work.)

The regular MS/DOS loader handles updating these entries and, while
using MS/DOS on the 95, there is no problem.  However, the system
manager must simulate some of the loader functions and there is a bug
in this simulation.  The bug is as follows:

	When loading an application for the first time (or activating
	it after a deactivation), the system manager examines the
	number of fixups found in the application's .EXM header.

	If this number is zero, everything works perfectly.  If this
	number is non-zero, the system manager uses a possibly
	incorrect value.

	Instead of using the value found in the file header, the
	system manger uses the greater of the value found in the file
	header and the value used for the last user (RAM) application.

The effects of this bug are subtle.  For example, if all but one of
your applications has zero fixups, you may never experience the
effects of this bug.

However, if you have two applications with non-zero fixups, then the
one with more fixups will tend to work fine, but the other one will
mysteriously fail.  I say "mysteriously" because it is difficult to
predict the effects.  Since the bug in effect "adds" entries to the
relocation table without adding values, the loader will relocate
whatever values it finds there, and the relocation amount will vary
depending upon exactly where the code is loaded.  Depending upon how
the application is written, it may work fine even with the bug or it
may fail in obvious or non-obvious ways.

There is no known fix for this bug, but there is a work around: ensure
that all applications that you use have no fixups.  This is easier
said than done.  Many applications distributed on ROM cards have
fixups and will thus exercise this bug.  If you must run an
application with fixups, then run it as the only application (other
than ROM applications) under the system manager and reboot
(Ctrl-Alt-Del) before running any other user applications.  You will
only encounter this bug when actually running user applications: they
can still be safely present in APNAME.LST file(s).

The MAKEEXM program distributed with MemUtil and Freyja differs from
HP's E2M program in several ways that help you deal with the fixup
problem.

MAKEEXM can be invoked in one of three ways.  The basic command line
is:

	makeexm <.exm file> [<.map file>]

The first parameter gives the name of a .EXE file that will be
converted in place to a .EXM file.  If you don't enter a suffix, the
program will assume ".EXM".  The second parameter is optional, and
specifies the name of the .MAP file that goes with the .EXE file.  If
you omit the parameter, the first parameter is used.  In any case, the
extension is forced to ".MAP".

This program differs from HP's E2M in three major ways.  First, it
converts the file in place (and is thus much faster).  Second, it
supports both Microsoft and Borland .MAP file formats.  Third, it
prints the number of fixups in the converted program, so that you can
see if you have any problems.

The second way is used if you have existing programs and want to find
out how many fixups these programs have. You invoke the MAKEEXM
program this way:

	makeexm -f <file(s)>

The -f option tells the program to simply print the number of fixups
in each file whose name is given.  The files are not modified.  You
can supply as many file names as you like (sorry, no wildcards).

Note that the program does not check whether the file is really a .EXE
or .EXM file.  If you supply it with the name of a non-.EXE and
non-.EXM file, it will print a meaningless number.

The third form of invoking MAKEEXM was devised for use with Freyja.
It looks like this:

	makeexm -p <.exm file> [<.map file>]

Except for the presence of the -p option, the usage is the same as
that of the basic command line.  The -p option tells MAKEEXM to "patch
out" all fixups.

Why is this necessary?  I was able to write MemUtil in such a way that
no fixups were generated by the compiler.  However, Freyja uses long
(32-bit) integer arithmetic in many places and, for no reason that I
can discern, Borland's Turbo C V2.0 always generates FAR calls to the
"helper" routines that do the 32-bit arithmetic.  Each such FAR call
generates a fixup.

Now, a system-manager compliant application must have a code segment
that is no more than 64 KBytes long.  Hence, all such FAR calls could
be converted to NEAR calls.  It would be nice if the compiler handled
this, but it doesn't.  MAKEEXM does this conversion.  Each fixup is
patched as follows:

In the .EXM file, the call looks like this:

	0x9A LOW HIGH 0x00 0x00
	               ^

The 0x9A is the code for a FAR CALL instruction.  The LOW and HIGH
values specify the offset to call.  The top two bytes are always zero,
as our code segment is less than 64 KBytes (in other uses, these
values need not be zero, but they always will be for an application).
The fixup entry points to the place marked with a carat.  The MAKEEXM
program changes these five bytes to the following:

	0xE8 _nearfar LOW HIGH

The 0xE8 is the code for a NEAR CALL instruction.  _nearfar is the
address of (actually, relative distance to) a special routine.  LOW
and HIGH are the same values as before, just moved by two bytes.

In summary, we started with a FAR call to a routine.  We wound up with
a NEAR call to a special helper routine, with the address of the
desired routine in a convenient spot.

So, how does _nearfar work?  This routine computes the correct FAR
call on the fly, preserving all flags and registers.  Thus, we avoid
exercising the loader bug by doing the relocation at run time.  This
routine is included with Freyja and will be in future versions of
MemUtil.  It looks like this:

;	A call to this routine is patched in with makeexm -p.  This
;	routine fixes up the stack and converts a near call into a far call.

_nearfar proc	near

; the stack now has:
;		SP	return address, which needs to be bumped

	push	AX	; reserve space for CS
	push	AX	; reserve space for where we jump to
	pushf
	push	AX	; save to make working room
	push	BX
	mov	BX,SP

; the stack now has:
;		SP + 10	return address
;		SP + 8	placeholder
;		SP + 6	placeholder
;		SP + 4	flags
;		SP + 2	saved AX
;		SP	saved BX

	mov	AX,[BX + 10]
	inc	AX		; skip over our data
	inc	AX
	mov	[BX + 8],AX	; put in correct place
	mov	AX,CS
	mov	[BX + 10],AX	; put in correct place

; the stack now has:
;		SP + 10	CS
;		SP + 8	correct return IP
;		SP + 6	place for us to jump to (not initialized yet)
;		SP + 4	flags
;		SP + 2	saved AX
;		SP	saved BX

	mov	AX,[BX + 8]
	dec	AX
	dec	AX
	push	BX
	mov	BX,AX
	mov	AX,CS:[BX]
	pop	BX
	mov	[BX + 6],AX

; the stack now has:
;		SP + 10	CS
;		SP + 8	correct IP for the far return
;		SP + 6	place for us to jump to
;		SP + 4	flags
;		SP + 2	saved AX
;		SP	saved BX

	pop	BX
	pop	AX
	popf
	ret		; take off!
_nearfar endp


THE 95'S APPLICATION TABLE

This section describes what I know about the 95's application table.
I would like to credit Hewlett-Packard company in general, and Everett
Kaser in particular, for explaining the techniques for retrieving the
application control blocks in the "what" program supplied as part of
the development tools.

	IMPORTANT: The information in here is ***NOT*** supported by
	HP.  Use at your own risk!  Do not call HP to ask for support
	or further information in this area!

The information is stored in an array of seventeen structures, each 48
bytes long.  Seventeen structures are used because there are eight
built-in applications, eight user applications, and one "housekeeping"
application, which is automatically activated when there aren't any
others: it displays the top card.

Here are the definitions that I use.  The names are assigned by me.
Some of the fields I understand in detail, and others I have only the
vaguest guesses about.

struct acb {
		/* Stack pointer and segment when the application was
		deactivated.  Possibly also used to save the current
		application's stack pointer/segment during a system
		manager call, but a running application could never
		detect this. */
	unsigned sp;
	unsigned ss;

		/* Points to the application's image vector. 
		Expanded upon later. */
	unsigned imagev_off;
	unsigned imagev_seg;

		/* Application's data segment.  The data segment
		length is stored somewhere else. */
	unsigned ds;

		/* Base segment of allocation.  What this means, I
		don't know. */
	unsigned mem_seg;

		/* Hot key that activates the application. */
	unsigned hot_key;

		/* Memory mapping information.  Presumably used by
		ROM applications. */
	char membank[6];

		/* Chip selection array.  Presumably used by ROM
		applications. */
	char chipsel[6];

		/* Current application state.  Values:
			0	Closed
			1	Active
			2	Suspended
			4	Exit
			8	Yield
			16	Exit Refused */
	char state;

		/* Is this 123 and other flags. */
	char flags;

		/* Resource segment? */
	unsigned rsrc_seg;

		/* Is the application just testing for keys? */
	char nowait;

		/* filler byte */
	char filler;

		/* Application name as presented in the low memory
		screen and by MemUtil.  For the ROM applications,
		this has one value if you have not activated them
		since reboot, then it changes when they are activated
		the first time.  There need not be a terminating NUL. */
	char name[12];

		/* more filler */
	char filler2[4];
	};

You might feel an urge to make changes in the 95 by updating this
structure directly.  For example, by changing the hot key entry.  Do
this at your own risk: I've never tried it and have no desire to.
(Let me know what you find out (:-).)

You find the application control block array in two steps.  First, you
need to locate the system manager's data segment.  There is an
undocumented call that returns that value.  The call looks like this:

_GetSysDS proc near
	push	DS		; save ours
	int	61H		; get the System Manager data segment
	mov	AX,DS		; move returned value to AX
	pop	DS		; restore ours
	ret
_GetSysDS endp

Now that you have found the starting place, you look for the table.
You find the table by doing a simple string search within that segment
(64 KByte maximum) for the string "JTASK0.EXE ".  Once you find this
string, you look back 80 bytes (32 bytes to the beginning of the
structure entry, then 48 bytes because JTASK0 is the second element in
the array).  This scheme works only probabilistically, but it is
unlikely that this string will occur elsewhere in the system manager
and in fact, I have never found it to fail.

As a holdover from debugging and extra safety measure, MemUtil stores
its search string as "KUBTL1/FYF!!" and subtracts one from each
character in this string before comparing.  It thus can't trip over
the search string by mistake.

The image vector appears to point to a place where the system manager
stores additional information about the application. I have not
attempted to puzzle out the use of that area, except for one use: you
can find the full pathname of the application's .EXM file.  The code
to do this is:

	...
	struct acb *a;
	char buf3[128];
	char fname[30];		/* exactly legal apname file name size + 1
*/
	unsigned amt;

	a = &acbs[curt->cur];
		...
			/* compute paragraph of imagevec */
		amt = a->imagev_seg + (a->imagev_off >> 4);
			/* get the data: buf3 is the buffer to
			put it in, the next parameter contain
			the amount of data to fetch, and amt
			is the paragraph to fetch from */
		BlockGet(buf3, sizeof(buf3), amt);
			/* compute the starting offset within
			the paragraph */
		amt = a->imagev_off & 0xf;
			/* get the filename, which starts 56 bytes
			into the imagevec; xstrncpy is like
			strncpy, but it always appends a NUL */
		xstrncpy(fname, &buf3[amt + 56]);
		...


OBTAINING FREYJA AND MEMUTIL

I offer three packages: Freyja, MemUtil, and HPDATAbase.

Freyja: an Emacs-type text editor that runs on MS/DOS systems in
general and under the system manager on the 95 in particular.  (Unix
systems, too, but there are better implementations for that
environment.)  This editor was introduced at the Corvallis Conference
in August 1991.  The editor has a zillion functions and features.  It
is written in C and the distribution includes full source, is at no
charge, and is under the terms of GNU CopyLeft.

MemUtil: an program that runs under the system manager that shows you
the current application status and lets you poke around the system
while the system manager is running.  (It also includes a "mini"
version called Aplist that only includes the application status part.)
It is written in C and the distribution includes full source, is at no
charge, and is under the terms of GNU CopyLeft.

HPDATAbase: is an ASCII text database of all HP products with part
numbers under 100.  It includes keyboard layouts, function lists,
memory structure, etc.

You can obtain copies of any of these packages in two ways:

- Over the Internet via anonymous FTP.  The host is mail.unet.umn.edu
and the directory is import/fin.  Start with the file
import/fin/README.

- Directly from me. Please send either blank diskettes and SASE _or_
about US$3.00 per package and I will supply everything.  I can supply
either 3 1/2" or 5 1/4" MS/DOS diskettes.  Diskette requirements are:

			5 1/4"	3 1/2"
			360 KB	720 KB

	Freyja		2	1
	MemUtil		1	1
	HPDATAbase	2	1

Craig Finseth
1343 Lafond
St Paul MN 55104
USA
+1 612 644 4027

fin@unet.umn.edu
Craig.Finseth@mr.net